China Categories
All Categories
21.5 Inch PCAP Multi Point Touch Screen Panel ILITEK / EETI IC Solution
Ask Latest Price
Brand Name:Touch China
Model Number:ZCC-7469
Certification:CE,ROHS
Price:Negotiable
Payment Terms:T/T
Supply Ability:13K per month
Delivery Time:25 working days
Company Data
Active Member
Contact Person
Carrie Jiang
Business Type:
86-755-85290942-845
Business Type:
Manufacturer Exporter Seller
Officials:
B905, Building 1, Chuangxin ZhihuiGang, No.155, Hongtian Road, Shajing Xinqiao street, Baoan District, Shenzhen 518103
Quality:
Quality Certifitation Available
Product Details
Company Profile
Product Details
21.5 Inch PCAP Multi Point Touch Screen Panel ILITEK / EETI IC Solution
21.5inch PCAP Touch Screen With USB Touch Controller With Low Resistance ITO Film
This 21.5" GFF capacitive touch panel, which uses SP- ITO film to make touch sensor, SP-ITO is a thin film material that can conduct electricity and behave as optically transparent. It is an extremely important optoelectronic material. It is widely used in P-cap Touch Panel,Smart Window,EMI etc.
Compared with other materials, SP-ITO has good electrical conductivity, good light transmission, excellent flexibility, high cost performance, good stability, can make super-narrow bezel, flexible touch screen and no moiré issue.
Technical advantages: Provide new solutions for flexible curved touch panel, touch panel with narrow bezel, and super-large touch panel.
For flexible and large-size touch fields:it can effectively control optical defects and
Capacitive Touch Panel:
Capacitive Touch Panel is to use the working current of induction of human body.The operational principle of the projected capacitive touch panel: There are two layers of the ITO layer under the surface of glass. This ITO layer respectively forms the electric field of X axis and Y axis, which can keep balance by crossing the surface of the class. Once the fingers approach the glass surface, the fingers and the electrode X axis or Y axis will form a new electric field, which can make the local capacitance change. Then the controller will determine the location based on capacitance changes.
Basic specification of Capacitive Touch Panel :
| Size | 65 inch |
| Total thickness | 3.5±0.3mm |
| Outline of Cover Lens | 525*312+ 0/-0.3mm |
| Outline of ITO film Sensor | 478*269.6±0.3mm |
| Viewing Area | 11431.5*806.1 ±0.3 mm |
| Active Area | 479.14*270.61±0.5 mm |
| Interface | USB |
| Input voltage | DC5V |
| Response time | 10ms |
| Report rate | 100 HZ |
| Input method | Hand writing or capacitive pen |
| Transmittance | ≥85% |
| Package list | 21.5inch Touch panel,controller board and USB cable |
| Controller: | ILITEK, WEIDA, EETI, Silicon Works etc.(Optional) |
| Cover glass thickness: | 1.1mm,1.8mm,2mm,3mm,4mm,5mm,6mm (Optional) |
| Cover glass treatments: | AG, AR, AF, AE (Optional) |
| CTP interface: | USB |
| Operating system: | Win7, Win8, Win10, WCE, Android, Linux, XP |
| Working temperature and humidity: | -20°C~70°C,20~85% RH, non-condensing |
| Storage environment and humidity : | -30°C~80°C, 20~85% RH, non-condensing |
| Transparency | ≥85% |
| Response time: | <10ms |
| ESD Air discharge: | 8KV |
| ESD Contact discharge: | 4KV |
| Pen hitting life: | ≥10,000,000/point |
| Pen sliding Durability: | ≥500,000 times |
| Finger Touch life: | ≥35,000,000 times |
| Certifications: | CE, FCC, Rohs |
| Aspect ratio: | 4:3 |
| Report rate: | 100HZ |
| Input method: | Finger or capacitive pen |
| Warranty: | 1 Year |
Advantages of SP-ITO Touch Screen
1.Realize process simplification: The new material application process can directly simplify more
than half of the traditional process, and the yield rate is greatly improved.
2. Cost down:
a. The application of new materials can eliminate all silver paste manufacturing processes and reduce the production cost of products.
b. The application of new materials can reduce the investment of production
personnel by more than half compared with the traditional production process.
SP-ITO material parameter
| SP-ITO-10 | Unit | Spec | Test Method |
| Resistance | Ω/□ | 10 | ASTM D 991 |
| Transmittance | % | 86 | ASTM D1003 |
| Haze | % | 0.42 | ASTM D1003 |
| b*(T) | % | 1.4 | ASTM E1164 |
| Uniformity | % | 2.5% | (Max.-min.)/ 2•Ave |
| Warping | - | bending radius of 20mm | 125umPET is 100000 times |
| Adhesion | - | 5B | ASTM D3359 |
| Dyne(HC) | - | 40 | Arco pen 5s |
SP-ITO FF sensor Reliability test
| Item | Test Condition | Spec | Test request | Check Point | ||||||||
| Before testing | First | Result | Second | Result | Third | Result | Four | result | ||||
| Low temperature | -40℃ | 504H | OK/OK | 0h | 72h | Pass(0F/5) | 144h | Pass(0F/5) | 336h | Pass(0F/5) | 504h | Pass(0F/5) |
| High temperature | 65℃/90%RH | 504H | OK/OK | 0h | 72h | Pass(0F/5) | 144h | Pass(0F/5) | 336h | Pass(0F/5) | 504h | Pass(0F/5) |
| Low and high temperature | -40℃~85℃ | 300cycle | OK/OK | 0cycle | 50cycle | Pass(0F/3) | 100 cycle | Pass(0F/3) | 200 cycle | Pass(0F/3) | 300 cycle | Pass(0F/3) |
| UV testing | 0.35±0.02W/(m2·nm) at340nm | 470h | OK/OK | 0h | 235h | Pass(0F/3) | 470h | Pass(0F/3) | /
| /
| /
| /
|
| Salt water testing | The whole surface is coated with salt water and placed in a high temperature and high humidity chamber | 168h | OK/OK | 0h | 24h | Pass(0F/5) | 72h | Pass(0F/5) | 168h | Pass(0F/5) | /
| /
|
Installation way of Touch Panel
Note 1: In order to make a touch panel work normally, please make sure that the host device is grounded.
Note 2: All environmental characteristics listed above should be less than 1 atmospheric pressure.
Note 3: The touch panel must be assembled with LCD panel by VHB or other materials, the control board should be fixed on LCM bezel or other mechanical parts of the system and then be grounded; In ESD test, the touch panel should work normally and there should be no damage to the appearance, when no static electricity discharges. However, irregular changes like display flickering are acceptable when static electricity discharges.
Note4: The touch panel may be damaged functionally or work unstably if the panel are not be grounded though your system to earth.
Note5: In order to make a touch panel work normally, power supply or power adapter has to conform to IEC 62684.
PCAP drawing:
Capacitive Touch Panel:
Capacitive Touch Panel is to use the working current of induction of human body.The operational principle of the projected capacitive touch panel: There are two layers of the ITO layer under the surface of glass. This ITO layer respectively forms the electric field of X axis and Y axis, which can keep balance by crossing the surface of the class. Once the fingers approach the glass surface, the fingers and the electrode X axis or Y axis will form a new electric field, which can make the local capacitance change. Then the controller will determine the location based on capacitance changes.
Company Profile
Shenzhen Touch-China Electronics Co.,Ltd.
*Company profile*
Established in 1999, Touch-China is an environmental-friendly enterprise engaged in developing and manufacturing Capacitive touch panel and optical bonding products.
Touch-China has the headquarter in Shenzhen and 60000m2 factory in
Fujian province, totally 600 employees.
Equipped with advanced machines and staffed with strong R&D
team, Touch-China is always grasping the pulse of the market,
products range from 7 to 86 inch, and they are widely used in the
automobile, Kiosks, POS, industrial, medical, finance, educational
and new retailing field.
Touch-China gets the certificates of ISO9001:2008&ISO/TS16949:2009. Obeying the priciple of honesty, the idea of double win, and taking quality as the priority, Touch-China has been recognized by domestic and overseas customers and gains long-term cooperation.
*Development history*
1.1999-2005: Established in Guangzhou in 1999, main products:
digital and resistive touch panels.
2. 2008-2010: Branches established in Xiamen, Shanghai and
HongKong.
3. 2011-2013: Heaquarter moved Shenzhen. Two factories were
established to expand production capacity.
4. 2013-2014: 60000m2 new own-factory set up in Fujian.
5. 2014-2015: ISO/TS16949:2009 certificate.
6. 2016-2017: optical bonding technology and large size touch panel
more than 43’’ put into mass production
7. 2019: Touch-China 20th Anniversary
*Company advantages*
1. 22 years' experience in designing and manufacturing touch
solution(G+G/G+F+F)
2. Own 60000sqm factory_good lead time and stable quality
3. In-housing touch sensor development and optical bonding workshop
4. Wide range of sizes from 7'' to 86'' Perfect adaptation to
customer’s requirements
5. Strong reseach team for both software and hardware support
6. Surface treatments like AG, AR, AF, Antibacterial, Anti-UV
ceramic ink
Factory outlooks
Front door Office building Front desk
Department No.1 Department No.2 Department No.3
Send your message to this supplier
You May Like
32 Inch Capacitive Touch Screen Panel G+G 10 Points With AG Coating ILITEK Chip
ILITEK Capacitive Projected Touch Screen Panel 10.1 Inch COF 10 Points USB IIC Interface
PCAP 8 Inch Touch Screen Panel For Car Navigators I2C Interface 5 Points
100 HZ SP ITO Film 10 Points 65" PCAP Touch Panel
Car Navigator 10 Inch Goodix9271 Touch Screen Panel With I²C Black Print
Black Multi Touch Points DC5V 75" GFF PCAP Touch Panel
Low Resistance USB 86" Projected Capacitive Touch Screen
Car Navigator I2C 10 Inch Touch Screen Panel With Black Prints
19 Inch 4:3 PCAP Touch Panel Wiht USB Interface And 3mm Cover Lens Financial System Multi Touch Strong Compatibility
70inch PCAP Touch Screen USB Multi Touch Points For Education Touch Monitor
EETI USB Controller Projected Capacitive Touch Scre 32 inch PCAP Touch Panel
Inquiry Cart
0