Single Door 64L 2-Zone Thermal Shock Test Equipment With 7 Inch TFT Color LCD Monitor

Single door 64L 2-Zone thermal shock test equipment with 7 inch TFT color LCD monitor

Control Method

With High and Low temperature reservation cabinet, open the damper when necessary to do fast

temperature shock test. BTC(balance temperature control) system will control SSPR with PID, to ensure

system heating equals to heat lost. So this system can work for long period stably

Specifications

Function: (Air Cooling and the temperature is +25C, no loading)
1. High Temperature Cabinet:	+60℃～+200℃
2. Low Temperature Cabinet:	-50℃～+70℃
3. High Temperature Thermal Shock range	+60℃～+150℃
4. Low Temperature Thermal Shock range	-40℃～-10℃
5.Ramp rate	In accordance with the IEC60068-3-5 standards Heating up rate for High Temperature Cabinet: +60℃to +200℃ non-linear 4.5℃/min no load Cooling down rate for High Temperature Cabinet: +70℃to -50℃ non-linear 3℃/min no load Ramp rate can be controlled linearly, the minimum rate is 1℃/min, the maximum can’t exceed the chamber’s ramp rate.
6.Temperature unifomity	≦±2℃
7.Temperature fluctuation	≦±0.5℃
8. Operating mode	a. High and low temperature thermal shock mode; b. High temperature, low temperature test can be controlled independently , when the samples are being tested in High temperature, low temperature cabinet and controlled independently , the test basket will be automatically locked. Two partitions can be put in the temperature tank, low temperature cabinet. Both high and low temperature test can be done.
Construction
1. Testing Cabinet Dimension	W 400× H 400 × D 400 mm
2. Outer Dimension	W 860 × H 2070 × D 2000 mm (Excluding the prominent part of the chamber)
3.Inner Cabinet Material	SUS304# Non Bright Stainless Steel Plate
4. Outer Cabinet Material	Stainless Steel with color plastic painting
5. Isolating Material	PUR + Glass Fiber
6. Heater	High efficiency electric heater
7. Air Circulation System	a. Teco Motor b. Stainless Steel lengthening Axil c. Sirocco Fan
8. Door	Single Door
9. Testing Holes	50mm at the top of the chamber
10. Sample Holders	2 sample holders with SUS #304
11.Test Drive way	Rack gear racking
11.Door Sealing	Silicone form sealing belt

Standards Met and Implemented:

GB/T2423.1.2

GB10592-89

GJB150

Prouduct Display

Packing and Shipment:

(1).Strong standard wood case, inner plastic films wrapped for temperature and humidity test chamber

(2).Usually we delivery the equipment by air,by sea or by express. it depends on customer.

After-sales service

We deal with your complains within 24 hours.

Training how to install the machine, training how to use the machine.

Engineers available to service machinery overseas.

All staffs in our company with philosophy of " integrity, dedication, truth-seeking, enterprise", would be

dedicated to provide high quality service and products for you.

ABOUT KOMEG
 

Founded in 1990, dedicating in environmental test equipment for over 30 years, KOMEG Technology lnd Co., Limited, is famous for its KOMEG star brand of environmental test equipment in China and overseas.

KOMEG specialize in climatic test chambers, temperature humidity test chambers, thermal shock test chambers, walk-in chambers, aging test chambers and burn-in room, drying ovens, Altitude test chamber, salt spray testers, and medical laboratory equipment, etc. During the past decades, KOMEG cooperated with and served many enterprises like Gree, Konka, Samsung, LG, Hiconiecs, BYD, Magna International, TOYOTA, Amicell, Stankomet, Premier, Hitek, UL, SGS, Intertek, etc.

KOMEG factory is located in Dongguan Songshan Lake, National Hi-Tech Industrial Development Zone, covering an area of 5, 000 sqm, with over 100 skilled employees including 30+ R&D engineers. (40 minutes from Shenzhen Baoan Airport by car; and 90 minutes from Guangzhou Baiyun Airport by car)

KOMEG also has branch office in Shenzhen.

Our Philosophy
Born for quality, test for future.

Our Aim

Better idea, better design and better quality.

KOMEG keep striving for continuous innovation, releasing no less than 5 new designs each year.

Our strong R&D team and skilled engineers and workers are the key factors for our success.

No matter standard models or customized project, we have rich experience to realize customers' requirements, so that our customers worldwide can benefit more from us when working with Komeg.

Ensure to meet your specific test standards, all key components and parts are imported famous brand from all over the world.

Thats why Desay( Apples' battery supplier, KONICA MINOLTA, SENKO, Midea, TCL and Huawei are also among our long-term clients. With KOMEG top brand strength, renowned reputation domestic and overseas, our products are widely exported to Europe, America, Southeast Asia,  Africa, Oceania, etc. countries like Russia, Germany, Korea, Singapore, Brazil, etc.


Distributors welcomed, Inquire today to get your order started.