VTT 2.03 Version 4 Support FH FM Vocom Online Service In Stock

VTT 2.03 Version 4 Support FH FM for Vocom

Package: 1 hard disk support D630 Laptop ( software will be actived by teamviewer)

This software support FH FM serials.

VTT in development model.

Test Function:

1-Service and maintenance
2-Engine, Engine mounting and equipment
3-Electrical system and instruments
33311-3-Preheat, Test
33445-3-Ignition Switch, Test
36303-3-Intermittent Wiper, Test
36415-2-Switch Lamp, Test
36421-3-Position Switch Back-up(Reversing) Lamp, Test
36423-3-Lever Switch High Beam/Low Beam, Test
36424-3-Stalk Switch Direction Indicator, Test
36491-3-Steering Wheel Buttons, Test
36603-3-Anti-theft Alarm Status, Test
36607-3-Logged anti theft alarm activation, read out
36614-3-Load Indicator, Test

36622-3-MID 163-TransponderReading, Test
36624-3-MID 163-Key Counting, Test
37173-3-Data Links, Fault Tracing with Oscilloscope
38117-3-Instrument Cluster, Test
38118-3-Gauge Checks, Instrument Cluster
38356-3-Calibration Number, Test
38440-3-Brake Contacts, Test
39203-3-Audio Unit Function Test
39746-3- Link, GPS, Test
39747-3- Link Satellite Communications Test

4-Transmission
40001-3-Starting gear selection, read out
40005-3-Range Inhibitor, Test
40010-3-Clutch Cylinder, Test

40012-3-Gear Selector Position Sensor, Test
40015-3-Range Cylinder, Test
40016-3-Split Cylinder, Test
40020-3-Gears, Test
40023-3-Transmission Speed Sensor, Test
40024-3-Oil Sensor Signals, Test
40025-3-Solenoid Valves, Test
40026-3-PWM valves clutches and brakes, test
40027-3-PWM Valves Main Pressure and Brake Pressure, Test
40028-3-Lockup and Retarder, Test
40083-3-PWM Valves Clutch, Test
40087-3-Pressure Sensor, Test
40091-3-Gear Activation, Control Housing (for Removal/Replacement)
40098-3-Gears, Check Oil Pressure, Test
40112-3-Gear Selector, Test
40145-3- Solenoid Valves Measuring, Test
40170-3-Inhibit Cylinder, First Gear, Test
41126-3-Clutch Wear Check, Test
41180-3-Clutch Drag, Test
41181-4-PWM Valves Clutch Activation, Test (Transmission Removed)
41182-3-PWM Valves Clutch Activation, Test
43116-4-Gears, Test (Transmission Removed)
43121-3-Gear Selector Cylinder 1/Reverse, Test
43122-3- Gear Selector Cylinder 2/3, Test
43126-3-Counter Shaft Brake Solenoid Valve Test
43128-4-Solenoid Valve, Brake Counter Shaft, Test (Transmission Removed)
43194-3-Input Signals for Gear Selection, Test
43773-3-Vehicle Inclination Sensor, Test
48141-3-Power Take-off Pressure, Clutch, Check

5-Brakes
50006-3-Brake Pads, Test
50011-3-Modulators, Test
50012-3-Foot Brake Valve, Test
50013-3-TCS Function Shut off, Test
50016-3-Wheel Speed Sensor Signal Voltage, Test
50017-3-Foot Brake Valve Signal Voltage, Test
50020-3-Wheel Speed Sensor, Test
50021-3-Brake Adaptation
56023-3-Pneumatic System, Status
56186-3-Air Dryer Solenoid Valves, Test
56362-3-Parking Brake Switch, Test
59110-3-Control Auxiliary Brake, Test
59221-3-Pressure Setting Retarder, Test
59222-3-Function Retarder, Test
59242-3-PWM Valve Retarder, Test
59297-3-Temperature Sensor, Test
59302-3-Wheel Speed Sensor ABS, Test
59303-3-Tooth Wheel ABS, Test
59305-3-Solenoid Control Valves, ABS, Test
59306-3-The ABS Control Unit, Test
59318-3-Foot Brake Valve Backup, Test
59364-3-EBS Control Unit Input / Output Signals Status, Test
59371-3-ESP Function Switching On and Off, Test
59376-3-Activate ABS Valve, Test

6-Axles, suspension and steering
64538-3-Control Valve, Test
64720-3-ECU, Electronically Controlled Hydraulic Axle Input Output Status, Test

7-Frame, springs, shocks and wheels
72873-3-External Signals to ECS, Test
72874-3-Control Box, Test
72875-3-Pressure Sensor, Test
72876-3-Level Sensor, Test
72877-3-Solenoid Valves, Test
72880-3-Lift Axle Switch, Test
72885-3-Air Suspension System Module In-Output Signals Status, Test
72887-3-ECS System status, test
72905-3-Additional Functions ECS, Parameter Test
72928-3-Verify Level Sensor Calibration, Test
77601-3-Tire Pressure Monitoring Truck, Test
77615-3-Tire Pressure Monitoring Trailer, Test

8-Body, cab and interior
87518-3-Parking heater timer, readout and resetting

9-Miscellaneous
93003-3-Bodybuilder Module Input / Output Signals, Test

Calibrate

1-Service and maintenance
2-Engine, Engine mounting and equipment
3-Electrical system and instruments
4-Tansmission
5-Brakes
6-Axles, suspension and steering
7-Frame, springs, shocks and wheels
8-Body, cab and interior
9-Miscellaneous

JIU TECH Enterprise Co., Ltd specializes in development and production of auto diagnostic scanners and auto maintenance tools for years. We provide better quality products and service for our clients. OEM, ODM manufacturing service for business all over the world is appreciated. Our products have been delivered to Europe, America, Africa and Oceania, all over the world, bringing us annual export sales of $2 million last year.

 Emphasis on product quality

We develop and manufacture auto diagnostic tools, car keyless remote controller, car key shell, transponder key, remote key, remote control duplicator and other auto maintenance tools etc. To ensure the consistency of our product quality, Our QC members with five years' experience on average monitor the entire production process.

We also offer a one year warranty.

Emphasis on Management
We insist on high standard, scientific development thoughts, devoted to pursuing continuous creativity of technology and management. Relying on the advanced equipments and high & stable quality, We have been approved by ISO9001:2000, FCC, CE. We benefit all our customers without any trouble of product quality.

We possess an 800-square-meter factory equipped with five production lines. Our advanced equipment includes automatic chip SMT lines, dust-free vacuum refilling machines and dust-free vacuum packaging machines. We produce 1, 000 units every month. Our delivery lead time is just one or three working days for our standard products. OEM products lead time is only within 2 weeks..

Providing best products and best service is our company target. Contact us today by email or phone and start with a small order, you will find we are your most valuable cooperator.